Call Toll Free: 877-985-2695
$49 Free Shipping

Soleil Sun Alarm™ Clock Operator's Manual

1. Product Overview

The Sun Alarm is designed to simulate a sunrise. The sunrise light cycle begins prior to the set alarm time. For example, with a 30 minute sunrise, the light will start 30 minutes before your alarm time. If you set the alarm time at 7am, the light will start at 6:30am.

If you are testing the Sun Alarm with a 30 minute sunrise, please keep in mind that the alarm set time must be more than 30 minutes after the clock time. e.g.: set the clock time to 7am and set the alarm time to 7:35 am. In 5 minutes you will see the sunrise light begin.

For best results, position the Sun Alarm on a nightstand at eye level.

MAIN FUNCTIONS

  • Wake-up light (sunrise): The light is gradually getting brighter, in the time period that you set, before the alarm clock rings.
  • Go-to-sleep light (sunset): The go-to-sleep light turns itself down during the set time period.
  • Brightness: You can change the brightness in 10 levels.
  • Time function: It shows year, month, date, week and time (in 24 hours or in 12 hours).
  • Alarm function / sound: Radio, 4 kinds of nature sound, and 6 kinds of music.
  • Radio: PLL radio, can preset 10 stations and listen your favorite radio station.
  • Snooze mode each 5 minutes.
  • Keeps your programming when there are power outages using a single battery.
  • LED light technology, no heat and low consumption.

2. Set-up and Operation

  1. Powering the Sun Alarm
    • Open battery compartment on bottom of Sun Alarm (use a screwdriver or small coin)
    • Insert battery
    • Insert power cord plug into the power input on the back of the Sun Alarm. Plug the transformer into a wall outlet.
  2. Set the current date and time
    • Press and release "set" button
    • Press "up" or "down"; buttons to set year
    • Press "set" button
    • Press "up" or "down" buttons to set month
    • Press "set" button
    • Press "up" or "down" buttons to set day
    • Press "set" button
    • Press "up" or "down" buttons to set 12 or 24 hour clock
    • Press "set" button
    • Press "up" or "down" buttons to set hour (make sure to notice AM or PM setting)
    • Press "set" button
    • Press "up" or "down" buttons to set minute.
    • Press "set" button
    • The clock should now display the correct date, day and time.
  3. Set the alarm time
    • Press and release "alarm" button
    • Press and release "set" button
    • Press "up" or "down" buttons to set hour (make sure to notice AM or PM setting)
    • Press and release "set" button
    • Press "up" or "down" buttons to set minute (make sure to notice AM or PM setting)
    • Press and release "set" button
    • Select a/r/n sound
    • Press "radio sound" button to select FM radio, nature sounds or beeper.
  4. The alarm time is now set. You will see a bell icon above the clock time. When looking at alarm time, if alarm bell is blinking, the alarm is on. If alarm bell is not blinking, alarm is off. To turn alarm off, press and release "alarm" button, then press and release "al on/off" button

3. How to

Use lamp:

  • Turn dial on right side of unit to adjust brightness.adjust brightness.

Turn off alarm:

  • Press and release "AL on/off" button
  • Note: Light will stay on. It will shut off automatically after 60 minutes. You can turn it off manually with
    the lamp down button.
  • If radio is used "press radio/sound" to turn it off.

Snooze:

  • Press and release "Snooze" button
  • Note: Snooze button does not turn off light. Light will stay on
  • Alarm sound will come back on in 5 minutes.
  • If radio is used "press radio/sound" to turn it off.

Turn off alarm setting for the next day:

  • Press and release "alarm" button
  • Press and release "al on/off" button

Listen to radio or nature sounds without alarm:

FM Digital Tuning Radio

  • Press and release "radio/sound" button to select FM radio
  • Press Tuning+ or Tuning- to select radio station
  • To set preset while listening to radio press SET button, then press UP or DOWN for memory number (1-10) Press SET to confirm..
  • Adjust volume with dial on left side of unit..
  • For better radio reception you may unwind wire antennae

Nature sounds

  • Press and release "radio/sound" button to select Nature Sounds
  • When Nature sound is selected press "up" or "down" buttons to select
    • Babbling Brook
    • Babbling Brook
    • Chirping Birds
    • Crickets
  • Nature sounds will continue for 20 minutes.

Turn on/off LCD display light:
Press LCD ON/OFF button

Sunset timer:

Prior to setting sunset time turn lamp on to desired starting brightness. The sunset feature only operates if the lamp is on prior to setting the sunset timer.

  • Turn on lamp to desired brightness
  • Press and release "mode" button 2 times
  • Press and release "set" button
  • Press and release "mode" button
  • You will see a blinking setting sun(sunset) in the upper right of display

Specifications:

Voltage: AC 100-240v ~ Frequency: 50Hz/60Hz
Input: AC 100-240v 50Hz/60Hz 0.3 Amps
Output: DC 6V 800 mA
Power cord: 70 Inches
FM Radio Frequency: 88-108 MHz
Size: 5.5"x5"x5.5"
Weight: 13.5 Oz.
Back up battery model #2032

Warranty Information:

Soleil Sun Alarm Company warrants that the Sun Alarm SA-3 will be free from defects in manufacture for a period of 90 days from the date of purchase. This warranty does not cover damage due to external causes including, but not limited to accident, abuse, misuse and /or problems with electrical power. For warranty repair or replacement please visit www.SunAlarm.com or call 800-298-2240

Safety & Service Instructions:

Do not place this unit near water or heat sources. There are no user-serviceable parts on the Sun Alarm. The LED lights are rated for 30,000-50,000 hours of use and are not replaceable. Do not open the Sun Alarm. This voids the warranty and can permanently damage the unit. For additional information visit www.SunAlarm.com

 

PHONE ORDERS

Toll Free: 877-985-2695 | Int'l Customers : 847-252-4355
MON - FRI (7am - 8pm CST) | SAT - SUN (8am - 5pm CST)